====== abstract ======
The configuration page implements the main place to configure the system.

====== Sections ======
The configuration file is divided in sections. This is also represented in the configuration file.

===== paths =====
This sections provides some filesystem paths.
You can enter them relative or absolut. Relative paths are relative from application root directory.

  * **record** The path where obd databases are recorded. Should be some permanent storage.
  * **app** Application root path. This path is used as relative root and should be absolut ideally.
  * **log** The path where logfiles are stored. Ideally a tmporary storage in RAM

===== connections =====
A section for configuring connections to and from the system.

  * **bt_dev** should point to the OBDII connection. If you're using an ELM327 with Bluetooth it will be mostlikely a /dev/rfcomm device
  * **wifi_pwd** This system is designed with a wifi hotspot. Here you specify the WPA2 key.
  * **gps_dev** specifies the GPS source. This is usually some kind of serial device. ttyS0 for example

===== startup =====
Controlls the startup behaviour of the system.
  * **bt_connect** automatically connect to a specified bluetooth device after boot
  * **autorecord** immediately start recording (start obdgpslogger) after boot. A connection to a OBDII dongle is required.